Full Set Non dismantle fuel injector cleaner tester tool kit FSC-100 for universal car fuel system cleaning

Top Reasons for choosing FSC-100 Gasoline car injector cleaner and tester:

1. Non dismantle type, make injector clean easily

2. Full kit with all adapters for all kinds of cars

3. Necessary tools for a good car repair garage

4. Our test kit include the new ford, land rover adapters, most of other tools do not have these 2 adapters

Description:

FSC-200 Car Fuel System injector Cleaning testing kit can clean fuel injector, Air intake system and Three-Way Catalytic Converter, it is a non dismantle cleaning tools for MST-A360 Fuel injector cleaner and tester.

Adapters implicated for the following vehicles:

Steps to use the machine:

1. Find out the fuel return hose, disconnect it and plug it with suitable adaptor;

2. Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adaptor;

3. Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work;

4. Charge the cleaning fluid into the tank of the cleaner;

5. Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI;

6. Check all connect point to make sure there is not leakage;

7. Start the engine to clean the fuel system.

NOTE:

1. To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.

3. The way to identify the inlet and return hose:

1. Generally speaking, inlet hose is bigger, return hose is smaller;

2. There is always a filter connected in the inlet hose side, and a buffer in the return side;

3. There is arrow on the hose to show the fuel flow direction

4. Wear protective glasses before operation . observe the joint whether there is oil leak. if there is, please start to work after remove the fault. as a result of losses caused by human negligence, the user undertakes the responsibility

Full Set Non dismantle fuel injector cleaner tester tool kit FSC-100 for universal car fuel system cleaning

Top Reasons for choosing FSC-100 Gasoline car injector cleaner and tester:

1. Non dismantle type, make injector clean easily

2. Full kit with all adapters for all kinds of cars

3. Necessary tools for a good car repair garage

4. Our test kit include the new ford, land rover adapters, most of other tools do not have these 2 adapters

Description:

FSC-200 Car Fuel System injector Cleaning testing kit can clean fuel injector, Air intake system and Three-Way Catalytic Converter, it is a non dismantle cleaning tools for MST-A360 Fuel injector cleaner and tester.

Adapters implicated for the following vehicles:

Steps to use the machine:

1. Find out the fuel return hose, disconnect it and plug it with suitable adaptor;

2. Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adaptor;

3. Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work;

4. Charge the cleaning fluid into the tank of the cleaner;

5. Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI;

6. Check all connect point to make sure there is not leakage;

7. Start the engine to clean the fuel system.

NOTE:

1. To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.

3. The way to identify the inlet and return hose:

1. Generally speaking, inlet hose is bigger, return hose is smaller;

2. There is always a filter connected in the inlet hose side, and a buffer in the return side;

3. There is arrow on the hose to show the fuel flow direction

4. Wear protective glasses before operation . observe the joint whether there is oil leak. if there is, please start to work after remove the fault. as a result of losses caused by human negligence, the user undertakes the responsibility

Full Set Non dismantle fuel injector cleaner tester tool kit FSC-100 for universal car fuel system cleaning

Top Reasons for choosing FSC-100 Gasoline car injector cleaner and tester:

1.  Non dismantle type, make injector clean easily

2.  Full kit with all adapters for all kinds of cars

3.  Necessary tools for a good car repair garage

4.  Our test kit include the new ford, land rover adapters, most of other tools do not have these 2 adapters

Description:

FSC-200 Car Fuel System injector Cleaning testing kit can clean fuel injector, Air intake system and Three-Way Catalytic Converter, it is a non dismantle cleaning tools for MST-A360 Fuel injector cleaner and tester.

Adapters implicated for the following vehicles:

Steps to use the machine:

1. Find out the fuel return hose, disconnect it and plug it with suitable adaptor;

2. Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adaptor;

3. Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work;

4. Charge the cleaning fluid into the tank of the cleaner;

5. Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI;

6. Check all connect point to make sure there is not leakage;

7. Start the engine to clean the fuel system.

NOTE:

1. To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.

3. The way to identify the inlet and return hose:

1. Generally speaking, inlet hose is bigger, return hose is smaller;

2. There is always a filter connected in the inlet hose side, and a buffer in the return side;

3. There is arrow on the hose to show the fuel flow direction

4. Wear protective glasses before operation . observe the joint whether there is oil leak. if there is, please start to work after remove the fault. as a result of losses caused by human negligence, the user undertakes the responsibility

58pcs tool Socket sets hand tools and sleeve parts for motor/car repair tool sets

Support small batch purchasing of hand tool sets. Supply best service for our customers.

1.As usual our hand tool set MOQ is 1000sets, however also can be negotiable according to customers specific orders

2.Customized logo and color is welcome to our hand tool set, our skilled technicists shall be pleased to design for you.

3.Customized model also can be made according to the quantity.

4.OEM ODM is welcome